Specifications
- SKU
- GTR-BF3
- Product Type
- Base Filler
- Series
- Allure Galaxy
- Width
- 3"
- Height
- 29⅞"
- Depth
- ¾"
Features
- 29⅞" tall to match the Allure base face frame
- Finished on the front face and both long edges
- No toe-kick notch; the toe kick is ordered separately
- Finished to match the cabinet door finish
- CARB2-compliant materials
Product Description
The Fabuwood Allure Galaxy Truffle 3" base filler (BF3) is a plain strip, ¾" thick, 3" wide and 29⅞" tall, made to close a gap in a run of base cabinets. It is finished to match Galaxy Truffle, a warm chocolate stain. Fabuwood finishes its front face and both long edges in Truffle.
Does the BF3 reach the floor?
No. The Truffle strip stops at 29⅞", the bottom of the Allure base face frame. Below the frame is a 4½" recessed toe kick, which is why a 34½" Galaxy Truffle base and its filler differ in height. There is no toe-kick notch on fillers made after June 15, 2024, so plan a Galaxy Truffle toe kick (TK8) or base board molding underneath, ordered on its own.
Common places for the Galaxy Truffle BF3
- At the end of a Galaxy Truffle run against a wall: the filler leaves room for drawers and door pulls to clear an uneven wall.
- Beside a Truffle blind corner base, which Fabuwood says must have a filler on the wall side, not supplied with it.
- Beside an appliance or a deeper cabinet: the Truffle strip gives a door and its pull room to swing open.
- Behind a Truffle SPO-BF3 spice or TBPO-BF3 towel bar pull-out, which comes without its filler.
Sizing the gap
If the space is more than 3", order the 6" BF6 in Truffle instead and rip it to width. Keep the Galaxy Truffle base fillers on the cabinet order itself, since Fabuwood says pieces made later may not match. In a free 3D kitchen design, a designer marks where each Truffle base filler goes. A door sample in Truffle is the easiest way to check the color at home. Stained finishes vary slightly from piece to piece, so small differences from the doors are normal.
How is a cabinet filler strip installed?
Your contractor rips the Truffle strip to the width of the gap, shapes the wall edge to follow the wall, and screws it to the side of the cabinet's face frame before that cabinet is fastened in place. We supply the Galaxy Truffle trim but don't install cabinets or trim.
Which sides of the Galaxy BF3 are finished?
The front face and both long edges of this Truffle base filler; wall and tall fillers are the ones finished on all four edges.
When will the Galaxy Truffle BF3 ship?
Typically in about 2 weeks, since Truffle is one of Fabuwood's stock Galaxy finishes. Delivery covers the 48 contiguous states.
Buying guide: How to Install Cabinet Filler Strips: Size, Scribe and Attach
About Fabuwood
Fabuwood builds pre-assembled cabinetry with Blum® soft-close hardware: the framed Allure line on ½" plywood boxes with dovetail drawers, the frameless Illume line on engineered furniture-board boxes with Blum Merivobox drawers, and the frameless Ovela line on ¾" plywood boxes with dovetail drawers, backed by a limited lifetime warranty. Every order ships with the same standards, so your kitchen comes together looking built-in from day one.
Explore the Fabuwood collectionThis framed Fabuwood style can be ordered in any Sherwin-Williams or Benjamin Moore color — we verify your color code as a certified dealer. Learn how it works
Lower 48 Delivery
Curbside & liftgate options
Competitive Pricing
Itemized dealer quotes
Superior Support
Real cabinet experts
Free 3D Design
Plan before you buy
Similar Products
Explore more
Shop Galaxy Truffle by Type
Shop Galaxy Truffle by Style
- Refrigerator End Panel
- Quarter Round Molding
- Decorative End Panel
- Dishwasher End Panel
- Light Rail Molding
- Beaded Molding
- Mirror Molding
- Corner Molding
- Scribe Molding
- Refacing Panel
- Floating Shelf
- Crown Molding
- Plywood Panel
- Pilaster Post
- Drawer Panel
- Cabinet Skin
- Square Post
- Corner Post
- Beadboard
- Toe Kick
- Valance
- Filler
- Column









