US Cabinet Depot Casselberry Saddle Specbook

Casselberry Door · 39 pages · 3.6 MB PDF · updated October 2026

Get the free PDF

Saddle is a warm brown stain on the only all-solid-birch door in the framed lineup, and its price book runs to 330 items over 39 pages. Open the US Cabinet Depot Casselberry Saddle Specbook and an 18-inch base, CS-B18, reads $333.96 RTA or $393.96 assembled.

Cover page of the US Cabinet Depot Casselberry Saddle Specbook
Products priced
330
Categories
7
Pages
39
With two prices
249

Get the free PDF

Answer 3 quick questions and the specbook downloads right away. We email you the link too.

Step 1 of 7

Who is this specbook for?

Prefer to talk? Call 609-900-3358

Call (609) 900-3358

A look inside

Three sample pages from the PDF. Select one to see it larger.

39 pages in the full PDF

Get the free PDF

Where the solid birch door sits on price

The 26 finish books fall onto five price levels, and Saddle is on the fourth. Its CS-B18 at $333.96 RTA is $46.20 above the same base in Shaker White and $14.52 below the top level, where Shaker Essence Oak and Haven Ember sit. Antique White on the same raised-panel door matched it on every cabinet we compared, so picking between the two Casselberry colors is a question of taste, not budget.

A stain behaves differently from paint in the small print. Glass-door wall cabinets are supplied with the interior stained to match the exterior, and the accessories pages offer a touch up kit but no spray can. Saddle also prints CS-B30, a 30-inch base with two doors and two drawers at $463.32 RTA and $523.32 assembled, a width only three finishes list in that configuration.

Totals climb fastest in the tall section. Its 21 entries begin at $784.52 for the 18-by-84 utility CS-U188424 and end at $1,444.52 for CS-U3096244RS. On the utility cabinets we checked, factory assembly is a $120 step where a standard base or wall is $60, which takes the 24-by-90 CS-U249024 from $964.48 to $1,084.48.

  • 330 items over 39 pages, 249 of them priced both RTA and assembled.
  • Glass-door walls and stackers arrive with a stained interior.
  • CS-B30 two-door, two-drawer base: $463.32 RTA, printed for three finishes only.
  • Three floating shelves, each with a recommended maximum load of 25 lbs.

What’s inside

330 products across 7 categories, every one with its code, size and price.

  • Codes, descriptions and W × H × D for every cabinet
  • List price, RTA price, assembled price and saving, side by side
  • Door, drawer and shelf configuration for each code
  • Dimensioned drawings and section notes
  • Fillers, panels, mouldings, accessories and depth modifications
Products per category in the Casselberry Saddle PDF
CategoryProducts
Base Cabinets100
Wall Cabinets114
Tall Cabinets21
Vanities24
Fillers & Panels30
Mouldings24
Accessories17

List, RTA and assembled pricing

Six common cabinets in Casselberry Saddle, as printed in the PDF. Every cabinet shows US Cabinet Depot's list price next to ours, up to 56% less. 249 of the 330 items carry both an RTA and an assembled price.

Sample list, RTA and assembled prices in Casselberry Saddle
CabinetListRTAAssembledSave
CS-B18Base cabinet, 18" × 34-1/2" × 24"$759$333.96$393.9656%
CS-SB36Sink Base cabinet, 36" × 34-1/2" × 24"$977$429.88$489.8856%
CS-3DB18Three Drawer Base cabinet, 18" × 34-1/2" × 24"$1,083$476.52$536.5256%
CS-W3030Wall cabinet, 30" × 30" × 12"$772$339.68$399.6856%
CS-W3036Wall cabinet, 30" × 36" × 12"$892$392.48$452.4856%
CS-U188424Utility cabinet, 18" × 84" × 24"$1,783$784.52$904.5256%
Shop Casselberry Saddle cabinets

Who it’s for

Homeowners

Budget a Casselberry Saddle layout before you commit: look up each cabinet by size, pick the RTA or the assembled price, and total it. Or send us your measurements and we will lay the kitchen out and price it for you.

Get a free 3D design

Contractors and the trade

Take off a job from the code column and compare both ways of buying: flat-packed to assemble on site, or assembled at the factory. Captivating Pro adds one point of contact and job-site delivery.

Join Captivating Pro

Common questions

What the PDF covers, how the prices work and how to get it.

No. A CS-W3030 wall is $339.68 RTA and a CS-SB36 sink base is $429.88, the same figures the Antique White pages show for those sizes. The two differ by a handful of codes instead: Saddle adds the CS-B30 base, while Antique White adds two drawer towers, a 30-inch vanity sink base, a spray paint can and the discontinued angled corbel.

The 18-inch-wide, 84-inch-high CS-U188424 is $904.52 assembled against $784.52 RTA, and the 90-inch CS-U189024 is $931.36 against $811.36. Nine of the 21 talls are rollout shelf kits, and the notes say each of those kits arrives in five boxes.

Three ways. There are two easy reach bases, including CS-BER36 at $521.40 RTA or $641.40 assembled, two more with lazy Susan trays that ship as two boxes, and three blind bases that must be installed with a filler bought separately. A diagonal corner sink kit is listed too, without its toe kick.

It is US Cabinet Depot’s own published list price for that cabinet in this finish. Our RTA price is printed beside it, with the saving (up to 56%), on every item in the book, cut-to-length pieces and accessories included.

Yes, the PDF is free. Answer 3 quick questions, enter your name, email and phone, and it downloads right away. We also email you a link that works for 14 days.

This edition was updated October 2026. The date is printed on the cover, and we replace the file when pricing changes.

All US Cabinet Depot finish specbooks

Ready to price your Casselberry Saddle kitchen?

Your Cart

Your cart is empty.

Browse cabinets →
Free · No obligation

See your new kitchen before you spend a dollar

Send rough measurements and a few photos. A designer replies within 2 business days, and you get photorealistic 3D renderings with an itemized quote in 24–48 hours.

Contractors get trade pricing. Have a quick question? Ask Cabinets AI →

Kitchen designed with the free 3D design service from Captivating Cabinets