Sizes & Layouts

12-Inch-Deep Base Cabinets: Shallow Options, Sizes and Prices

Noor K.Noor K.
Bright narrow galley kitchen with a run of white shaker 12-inch-deep base cabinets and a slim quartz countertop on one wall, full-depth cabinets opposite and a wide clear walkway between

12-inch-deep base cabinets are full-height kitchen bases built half as deep as the standard 24 inches, so a counter-height run sticks out only about 13½ inches from the wall once its top is on. Fabuwood Allure makes them 9 to 36 inches wide, from $266.50 in Galaxy Frost.

Check the depth before you buy: most "12-inch base" listings are 12 inches wide and 24 deep. Where a true shallow base doesn't fit, four other routes are priced below: a wall cabinet on a toe kick, a factory depth cut, a 21-inch vanity base and a 12-inch-deep tall pantry.

Key takeaways

  • Fabuwood's shallow bases (B09FD-12D to B36FD-12D) are 34½ inches tall and 12 inches deep, with full-height doors and no drawers. In Galaxy Frost they run $266.50 to $477.75.
  • Shallow is cheaper, not just smaller: an 8-foot run of 12-inch bases costs $1,427.40 in Galaxy Frost against $1,869.40 at full depth, but it gives up the drawers.
  • Need drawers, or a depth between 12 and 24 inches? Fabuwood's CUT-BASE (in ¼-inch steps) and CUT-DBASE modifications cut a standard or drawer base down to a 12-inch minimum, priced on your quote.
  • A wall cabinet on a toe kick costs more than a true shallow base in Fabuwood ($471.25 against $442.00 at 30 inches wide), so save that trick for lines that don't make one.
Table of Contents

What Are 12-Inch-Deep Base Cabinets?

A 12-inch-deep base cabinet is a floor cabinet with the same 34½-inch height as a standard base but half its depth, so it takes a countertop at the usual 36 inches while standing as shallow as an upper cabinet.

Standard bases are 24 inches deep, and wall cabinets are 12. A shallow base borrows the wall-cabinet depth and keeps the base height and toe kick, so it lines up with a normal run at the counter and at the floor. "Shallow base" covers any base under 24 inches deep; retailers also sell 15-, 18- and 21-inch versions (see types of base cabinets).

B30FD-12D reads as base, 30 inches wide, full-height door, 12 inches deep; our guide to reading cabinet SKU codes explains the other codes.

Listings give width × height × depth, so a "12-inch base" is 12 inches wide unless the third number says otherwise; look for "12D," "shallow" or "reduced depth" in the name.

Where Do Shallow Base Cabinets Make Sense?

Shallow base cabinets make sense wherever a 25½-inch counter would squeeze a walkway below about 36 inches, or where you want closed storage and a ledge but not a full work counter.

The aisle math decides it. The NKBA's Kitchen Planning Guidelines recommend at least 36 inches for a walkway and at least 42 inches for a one-cook work aisle (48 for more than one cook). Swapping a 24-inch base for a 12-inch one gives back about 12 inches of floor.

These are the rooms where we see shallow bases do the most good:

  • The second wall of a narrow galley. Keep full depth on the cooking side and run shallow bases opposite. Our galley kitchen plans show the full layouts.
  • Hallways, stair walls and behind a sofa. A 13½-inch counter with doors below is storage you can walk past, or a console.
  • Mudrooms and laundry rooms. Shallow bases suit a bench wall or a folding ledge; see our mudroom cabinet guide and laundry room cabinet guide.
  • The seating side of an island. Shallow bases behind the working row give storage without pushing the stools out; our island cabinet guide covers the overhang.
  • Coffee and bar walls. A shallow counter holds a machine or glassware without stealing the dining room. See the coffee bar and wet bar guides.

Accessible kitchens raise the stakes. The 2010 ADA Standards (section 804.2) require at least 40 inches between opposing base cabinets, counters, appliances or walls in a pass-through kitchen and 60 inches in a U-shaped one, where those rules apply. Our ADA cabinet guide explains when they do.

What Sizes and Prices Do Shallow Bases Come In?

Fabuwood's shallow bases come in ten widths from 9 to 36 inches, in 3-inch steps, all 34½ inches tall and 12 inches deep, with full-height doors. These are the Galaxy Frost prices on our live product pages after the 35% Fabuwood discount, checked November 12, 2026:

Code W × H × D Our price With one finished side
B09FD-12D 9 × 34½ × 12 $266.50 $328.90
B12FD-12D 12 × 34½ × 12 $321.75 $384.15
B15FD-12D 15 × 34½ × 12 $331.50 $393.90
B18FD-12D 18 × 34½ × 12 $364.00 $426.40
B21FD-12D 21 × 34½ × 12 $390.00 $452.40
B24FD-12D 24 × 34½ × 12 $396.50 $458.90
B27FD-12D 27 × 34½ × 12 $429.00 $491.40
B30FD-12D 30 × 34½ × 12 $442.00 $504.40
B33FD-12D 33 × 34½ × 12 $455.00 $517.40
B36FD-12D 36 × 34½ × 12 $477.75 $540.15

A finished side adds $62.40, the price of Fabuwood's base end skin, on any box whose side shows. Our guide to end panels, fillers and scribe molding explains when you need one.

Fabuwood Allure offers ten widths, and our designer confirms each one in your finish before the order goes in. Price tracks the finish: the 36-inch box is $477.75 in Galaxy Frost, Dove, Nickel, Timber and Indigo and in Luxe Frost, and $611.00 in Galaxy Desert Oak, Luna Dove, Echo Signature Dove and Fusion Oyster.

Fabuwood's frameless Illume and Ovela lines have no 12-inch-deep base. Galaxy stock finishes typically ship in about 2 weeks; Galaxy Macadamia Beige, Pitch Black and Pistachio Green are Designer Collection colors that typically take 6 to 8 weeks. Browse all Galaxy Frost cabinets or every base cabinet type we list.

What Are the Ways to Get a Shallow Base Run?

There are five ways to get a shallow base run: a purpose-made 12-inch base, a wall cabinet on a toe kick, a factory depth cut on a standard base, a 21-inch vanity base, or a 12-inch-deep tall cabinet. Each trades price, drawers and finish quality differently.

Infographic comparing four ways to get a shallow base run: a 12-inch shallow base, a wall cabinet with a 4.5-inch toe kick, a standard base cut down to 12 to 23.75 inches, and a 21-inch vanity base, each with its depth and whether it has drawers
Four routes to a shallow base run. The purpose-made 12-inch base is the simplest; a factory depth cut is the only route shallower than 21 inches with drawers.

The table compares them at about 30 inches wide in Galaxy Frost. Cabinet prices are from our live product pages; modification prices are Fabuwood spec-book net figures, quoted with your order.

Route Depth Drawers? 30"-wide example Best for The catch
Shallow base 12" No, full-height doors B30FD-12D: $442.00 Most shallow runs Doors only; 34½" tall only
Wall cabinet + factory toe kick 12" No W3030 $383.50 + ATTACH-TK $87.75 = $471.25 Rarely, in Fabuwood Costs more; toe kick ships unfinished with a visible side seam
Standard base cut down 12" to 23¾" Yes, drawer boxes cut shorter B30 $555.75 + CUT-BASE $139.75 = $695.50 15"–21" depths, or a drawer on top Highest price of the counter-height routes; drawer depth drops in 3" steps
Vanity base 21" Not in VB30FD; vanity drawer bases (VDB) have them VB30FD: $461.50 Saving 3 inches with no modification Only 3 inches shallower
Shallow tall pantry 12" No TP181290 (18" wide): $1,079.00 Floor-to-ceiling storage, no counter No work surface

The choice comes down to drawers and depth. If doors at 12 inches will do, choose the shallow base, the cheapest factory-built 12-inch option in Fabuwood. If you need drawers or a 15- to 18-inch depth, cut down a standard base. If 3 inches is enough, use a vanity base; if you need no counter, a 12-inch-deep tall pantry.

Can You Use Wall Cabinets as Base Cabinets?

You can use wall cabinets as base cabinets, either with a factory-attached toe kick or on a site-built platform, but in Fabuwood a true shallow base is cheaper and cleaner.

White shaker wall cabinet installed on the floor on a matching painted toe kick so its top meets a countertop at standard base height, beside a standard shallow base cabinet
A 30-inch wall cabinet on a 4½-inch toe kick reaches base height. In Fabuwood, a purpose-made shallow base does the same job for less.

The heights work out neatly. A 30-inch-tall Fabuwood wall cabinet plus Fabuwood's 4½-inch toe kick lands at 34½ inches, the same as a base. Fabuwood's spec book lists that as a factory modification, ATTACH-TK, which it describes as turning a wall cabinet into a base cabinet. The book doesn't state the attached kick's height, so we confirm the finished height on the quote.

The spec book also lists the limits. The attached toe kick comes unfinished, with a visible seam on the sides, unless the wall cabinet's depth is also increased; a no-seam version is mentioned but not priced. And at 30 inches wide, W3030 plus ATTACH-TK is $471.25, against $442.00 for the purpose-made B30FD-12D.

So in a Fabuwood kitchen, we'd use a wall cabinet as a base only for a size the shallow range doesn't cover, such as a box wider than 36 inches.

The field method sets ordinary wall cabinets on a site-built 2×4 base: one board on the floor under the front edge, another screwed to the wall, and each cabinet screwed to the base and the wall, as Hunker's walkthrough describes. We'd then face the exposed front with toe kick.

The platform is a carpenter's workaround the cabinet maker doesn't list, so treat it with care:

  • Load. Wall cabinets are built to hang. A stone top on a platform is a question for your installer and the maker, not a guess.
  • Warranty. Manufacturers generally exclude cabinets that are altered or installed in ways they don't specify, so ask us before you plan on it.

This is the realistic route in a line with no shallow base. US Cabinet Depot doesn't list one, for example, so a Shaker White W3030 at $292.60 on a site-built platform is one way to build a USCD shallow run; the decreased-depth modification below is the other. USCD typically ships in about 3 business days flat-packed or about 5 assembled.

How Does a Reduced-Depth Base Modification Work?

A reduced-depth modification is a factory cut that makes a standard 24-inch base shallower before it ships, which is the way to get drawers or an in-between depth such as 15 or 18 inches.

Fabuwood's spec book lists four versions, each priced on top of the cabinet at the spec book's net figure and confirmed on your quote:

Modification What it cuts Limits from the spec book Spec-book net
CUT-BASE Standard base ¼" steps, 12" minimum; drawer boxes and slides shrink in 3" steps $139.75
CUT-DBASE Drawer base 12" minimum; every drawer box ends up 3" shorter than the cabinet's new depth $198.25
CUT-SBASE Sink base No minimum; usually 3" steps, custom depths on request $107.25
CUT-ROD Roll-out drawer For cabinets under 24" deep $91.00

An 18-inch-deep, 36-inch three-drawer base is a DB36 ($1,030.25) plus CUT-DBASE ($198.25), or $1,228.50, with drawers about 15 inches deep. That is the most expensive way to get shallow storage, but it is the only route shallower than 21 inches with real drawers.

US Cabinet Depot's specification manual also lists decreased depth as a modification on framed, assembled cabinets. USCD says modifications can add up to 5 business days and take the whole order off its normal lead time, so ask us to quote it before you plan around it.

Is a 21-Inch Vanity Base a Good Middle Ground?

A 21-inch vanity base is a good middle ground when you need only 3 inches back, because it is a stock box at counter height with no modification.

Fabuwood's 34½-inch vanity bases are 21 inches deep at kitchen-base height, so the counter doesn't step. The Galaxy Frost VB30FD is $461.50, and the VSB30-34 vanity sink base is the same price. US Cabinet Depot's 30-inch full-height-door vanity sink base, VS30FH, is 21 inches deep and $498.52 in Shaker White.

The catch is that 3 inches rarely rescues a walkway that's a foot short, so vanity bases suit laundry rooms, desk walls and butler's pantry runs where 22½ inches of counter is plenty. Our vanity sizes and heights guide covers the full vanity range.

How Deep Is the Countertop on a Shallow Base?

The countertop on a 12-inch-deep base is usually about 13½ inches deep, the same 1½ inches past the box that gives a 24-inch base its 25½-inch top, and it sits at the standard 36 inches.

Infographic side sections of four base cabinet depths with their countertops: 12-inch base with a 13.5-inch top, 18-inch with 19.5, 21-inch vanity base with 22.5, and 24-inch base with 25.5, all 36 inches high
Every depth lands at the same 36-inch counter height; the top runs about 1½ inches past the box.

The same 1½-inch allowance, about ¾ inch of door plus a small overhang, applies at every depth. Your fabricator sets the exact overhang; our countertop heights and depths guide covers the standards.

Base depth Typical top depth Floor saved vs a 24" base What the top is good for
12" shallow base About 13½" About 12" Landing ledge, display, coffee machine, folding
18" cut-down base About 19½" About 6" Light prep, small appliances
21" vanity base About 22½" About 3" Desk, laundry folding, serving
24" standard base About 25½" — Full work counter

A 13½-inch top is a ledge, not a work counter. The NKBA's countertop guideline counts frontage at 24 inches deep, so a shallow run adds storage and a landing spot but doesn't replace prep space on the cooking side.

What Fits in a Shallow Base Cabinet?

A shallow base cabinet holds the kind of things you'd keep in an upper cabinet, such as cans, jars, glassware, cleaning supplies and small bins; stockpots, stand mixers and a 13-inch-deep half-sheet pan laid flat are unlikely to fit.

Low run of white shaker 12-inch-deep base cabinets with a slim light countertop standing behind a light sofa as a storage console in a bright living room
Behind a sofa, a shallow base run becomes a console with closed storage for games, chargers and remotes.

Fabuwood's spec book doesn't list a shelf, or a shelf depth, for its shallow bases, so treat the next figure as a guide rather than a spec. Its 12-inch-deep wall cabinets come with 10⅝-inch shelves, a fair guide to the usable depth after the face frame and door.

That depth works as one row: nothing hides behind anything else, which is why shallow bases make good pantry and supply cabinets. In our experience these fit well:

  • Canned goods, spice refills, jars and bottles, one item deep
  • Glassware, mugs and coffee supplies under a bar or coffee ledge
  • Cleaning sprays, detergent and dryer sheets in a laundry run
  • Shoes, hats and dog leashes in a mudroom bench wall
  • Board games, chargers and remotes in a console behind a sofa

Large cookware belongs in full-depth drawers. Fabuwood sells a CUT-ROD modification for cabinets under 24 inches deep, but the spec book doesn't list which roll-outs fit the shallow bases, so ask us.

Is There a 12-Inch-Deep Pantry Cabinet?

Yes, Fabuwood makes 12-inch-deep tall pantry cabinets, 15 to 36 inches wide and 84, 90, 93 or 96 inches tall, for floor-to-ceiling shallow storage.

Hallway storage wall with two white shaker 12-inch-deep tall pantry cabinets at the ends and shallow base cabinets with a slim countertop between them, wall cabinets above lined up with the tall tops
Shallow talls at the ends and shallow bases between: a full storage wall that stands only about 13½ inches off the wall.

In Galaxy Frost at 90 inches tall, the TP151290 is $913.25, the TP181290 is $1,079.00 and the TP241290 is $1,296.75. A finished side on a 12-inch tall is $126.75. The code reads width, depth, height, so TP181290 is 18 wide, 12 deep and 90 tall.

Shallow talls pair well with shallow bases. A hallway wall can run tall pantries at the ends and a 13½-inch counter between them, with wall cabinets above lined up with the tall tops. Our pantry cabinet sizes guide covers the full tall range.

What Does an 8-Foot Shallow Run Cost?

An 8-foot, wall-to-wall run of 12-inch-deep bases costs $1,427.40 in Galaxy Frost, cabinets and trim only, which is $442.00 less than the same run at full depth.

The run fills a 96-inch alcove, such as a galley's second wall or a hallway niche, with a 3-inch filler at each wall so the doors clear and one 8-foot toe kick. Both versions use live Galaxy Frost prices checked November 12, 2026:

Item 12"-deep run 24"-deep run
Left filler, BF3 $26.00 $26.00
36" base B36FD-12D $477.75 B36 $676.00
18" base B18FD-12D $364.00 B18 $409.50
36" base B36FD-12D $477.75 B36 $676.00
Right filler, BF3 $26.00 $26.00
Toe kick, TK8 $55.90 $55.90
Total, 96" $1,427.40 $1,869.40

The shallow run gives up the top drawers, two in each B36, and about half the storage volume. Countertop, hardware and installation are extra in both columns.

Fillers are where a measurement error usually shows up, so measure the alcove at the floor, at 34½ inches and at the top. Our guide to 3-inch cabinet increments explains how to fill an odd width, and the toe kick guide covers the trim. For the rest of the room, see the standard kitchen dimensions worth knowing before you order.

Frequently Asked Questions

Do they make 12-inch-deep base cabinets?

Yes, Fabuwood Allure makes 12-inch-deep bases in ten widths from 9 to 36 inches, across the Allure finishes we carry. They are 34½ inches tall with full-height doors. In Galaxy Frost they cost $266.50 to $477.75 on our site.

What is the shallowest base cabinet depth?

The shallowest stock base we list is 12 inches deep, Fabuwood's B09FD-12D to B36FD-12D range. Fabuwood's CUT-BASE and CUT-DBASE modifications also stop at a 12-inch minimum. Only sink bases (CUT-SBASE) can be cut below that, because they have no drawer slides.

Can you put a countertop on a 12-inch-deep base?

Yes, a 12-inch base takes a countertop at the standard 36 inches, usually about 13½ inches deep. The narrow strip is often cut from a fabricator's remnant. Ask your fabricator about overhang and support for stone.

Can I use upper cabinets as lower cabinets?

You can, with a toe kick or platform under them, since a 30-inch wall cabinet plus a 4½-inch toe kick reaches base height. Fabuwood offers the toe kick as a factory modification (ATTACH-TK, $87.75 net in the spec book, quoted with your order). A purpose-made shallow base is still cheaper in Fabuwood.

Are shallow base cabinets cheaper than standard bases?

Yes, a 12-inch-deep base usually costs less than a full-depth base of the same width. In Galaxy Frost, the 36-inch shallow base is $477.75 against $676.00 for a standard B36. The standard box includes drawers, though.

Do shallow bases have drawers?

Fabuwood's shallow bases have full-height doors and no drawers. For drawers in a shallow run, order a drawer base with the CUT-DBASE modification. Its drawer boxes come out 3 inches shorter than the cut cabinet.

How much aisle space do I need in front of base cabinets?

The NKBA recommends at least 36 inches for a walkway and 42 inches for a one-cook work aisle, or 48 for more than one cook. Shallow bases on one side are a common way to reach those numbers in a narrow room. Local codes may apply.

How long do shallow bases take to ship?

Fabuwood stock finishes, Galaxy included, typically ship in about 2 weeks; custom-paint colors, such as the Designer Collection's Galaxy Macadamia Beige, Pitch Black and Pistachio Green, typically take 6 to 8 weeks. Because they're built to order, the sale is final on submission; before production, a cancellation needs the manufacturer's acceptance and typically carries a 30% restocking fee.

Can a shallow base go under a sink or beside a dishwasher?

No, a sink and a built-in dishwasher both need more depth than a 12-inch box, so keep those bays at full depth. A sink base can be cut shallower with CUT-SBASE ($107.25 spec-book net, quoted with your order) once we check the bowl and drain.

Get Your Shallow Run Drawn

Send us the wall length, the depth you can give up, the ceiling height and what you plan to store. A designer from our free 3D design service answers within two business days, and 3D renderings with an itemized quote typically follow 24–48 hours after your measurements arrive. To see a finish first, order a Fabuwood door sample ($35, final sale).

Captivating Cabinets ships to the lower 48 states and does not install. Your contractor fits the run; New Jersey homeowners can book installation with our sister company, Captivating Construction Group. Questions? Contact us or call (609) 900-3358.

Sources: Fabuwood's digital spec book with Galaxy Frost prices effective October 1, 2026 (sizes, modifications, notes) and our live Allure listings (shallow-base availability); captivatingcabinets.com product prices after the 35% Fabuwood discount and US Cabinet Depot prices, checked November 12, 2026; US Cabinet Depot Specification Manual V7 (modifications, vanity depths); NKBA Kitchen Planning Guidelines (walkway, work aisle, countertop frontage); 2010 ADA Standards for Accessible Design, section 804.2; Hunker, "How to Install Wall Cabinets as Base Cabinets" (platform method). Run layouts and arithmetic are our own.

Found this useful? Share it
Add as a preferred source on Google
Noor K.

Written by

Noor K.

Technology Manager at Captivating Cabinets

Noor manages and develops the Captivating Cabinets website, and writes practical guides on cabinet styles, finishes, pricing, and remodel planning.

Your Cart

Your cart is empty.

Browse cabinets →
Free · No obligation

See your new kitchen before you spend a dollar

Send rough measurements and a few photos. A designer replies within 2 business days, and you get photorealistic 3D renderings with an itemized quote in 24–48 hours.

Contractors get trade pricing. Have a quick question? Ask Cabinets AI →

Kitchen designed with the free 3D design service from Captivating Cabinets