Sizes & Layouts

Wardrobe and Closet Cabinets: Sizes, Rod Heights and Two Ways to Build Them

Noor K.Noor K.
Bright bedroom wardrobe wall built from white shaker tall cabinets on each side of an open hanging bay with clothes on a rod and a short cabinet above, one tower door open showing folded sweaters and a pull-out shoe tray

Wardrobe and closet cabinets need about 24 inches of depth for hanging clothes, a rod at about 66 inches for long garments or two rods at about 40 and 82 inches for shirts, and 12- to 16-inch shelves and drawers for folded things.

There are two practical ways to get them. A built-to-order closet system, such as the St. Martin Wardrobe Closet program, is designed around hanging clothes from the start. Or you can build a wardrobe wall from kitchen cabinets: 24-inch-deep tall pantries for shelves and roll-outs, drawer bases as a dresser, and an open bay for the rod.

Below are the standard sizes, how the two routes compare, two priced plans in Fabuwood Galaxy Frost ($2,642.90 and $4,817.15, cabinets and trim only), and layouts for walk-in and reach-in closets. For a room drawn to your own measurements, our designers will do it free.

Key takeaways

  • Hanging clothes need about 24 inches of depth. A closet under 22 inches deep is too shallow for hangers, and coats want 28.
  • Kitchen tall cabinets make good wardrobe storage for folded clothes, shoes and bins, but a 24-inch-deep Galaxy pantry has 21-inch shelves and no closet-rod part, so we hang clothes in an open bay between cabinets instead of inside them.
  • St. Martin's Wardrobe Closet program is built for clothing: 1-inch furniture-board shelves and sides, aluminum interior fittings, integrated LED strips, four slab door styles and ten finishes, quoted per project and typically shipped in 4–6 weeks.
  • A walk-in closet with hanging on one wall needs about 4 feet of width; hanging on both side walls needs about 6 feet.
Table of Contents

What Size Should Wardrobe Cabinets Be?

Cabinets and closets for hanging clothes should be about 24 inches deep, with the rod about 12 inches from the back wall, while shelving for folded clothes works at 12 to 16 inches deep. The figures below are the common planning numbers published by closet designers and home guides; your own clothes are the final test.

Infographic elevation of a closet: single long-hang rod at 66 inches, double-hang rods at 40 and a half and 81 and three-quarter inches, top shelf at 84 inches, and a side section showing 24 inches of hanging depth with the rod 12 inches from the back wall
Common planning heights: one rod at 66 inches for long garments, or two at about 40½ and 81¾ inches; hanging needs about 24 inches of depth.
What Typical figure Source
Depth for hanging clothes About 24"; 28" for coats and bulky items Hunker, ClosetWorld
Too shallow to hang Under 22" Hunker
Rod distance from back wall At least 12" Bob Vila
Single rod, long garments 66" (Hunker gives 68" for dresses and coats) Bob Vila, Hunker
Double hang, lower rod 40½" to 42" Bob Vila, Hunker
Double hang, upper rod 81¾" to 84" Bob Vila, Hunker
Gap from shelf to top of rod At least 2" Bob Vila
Top shelf About 84" high, at least 16" deep Hunker
Walk-in passage At least 24" clear between hanging clothes or shelves Hunker
Room in front of swing-open closet doors 36" ClosetWorld

Sources: Hunker, "What Are Standard Closet Dimensions?"; Bob Vila, "This Is the Perfect Height for a Closet Rod"; ClosetWorld, "All the Standard Closet Dimensions You Need to Know".

Depth is the number that decides everything else. A hanger carries the garment's shoulders across the closet, front to back, so a cabinet or closet shallower than the garment's width crushes the sleeves against the back or the doors. That is why a 24-inch-deep closet is the norm and a 12-inch-deep linen cabinet is not a wardrobe.

Width is more flexible. A wardrobe can be one 30-inch section or a whole wall, as long as each hanging bay is wide enough for what goes in it and each door or drawer can open fully.

Single, Double or Long Hang: Which Rod Layout Fits?

Double hang fits shirts, jackets and folded trousers, and doubles the rod length in the same width; single long hang fits dresses, coats and long trousers. Most wardrobes mix the two: a narrow long-hang bay and a wider double-hang bay.

With the lower rod at 40½ inches and the upper at 81¾, each rod holds clothes about 40 inches long. A single rod at 66 inches leaves room for full-length garments below and a shelf above.

Count your long items before you choose. If dresses and coats fill less than a third of the rod, give them a narrow single bay and put everything else on double rods. For children, Bob Vila suggests a lower rod at 30 inches, which can move up later if the rod hangs on brackets rather than fixed sockets.

A cabinet-built wardrobe has one more constraint: the rod has to clear the cabinets above it. In Plan 1 below, a 15-inch-tall wall cabinet sits over the hanging bay from 75 to 90 inches, so that bay is single hang at 66 inches.

Closet System or Kitchen Cabinets: Which Should You Use?

A purpose-built closet system is the better choice when most of the space is for hanging clothes; kitchen cabinets are the better choice when the wardrobe is mostly drawers and shelves, or has to match nearby cabinetry. The two routes we sell compare like this:

St. Martin Wardrobe Closet Fabuwood Galaxy kitchen cabinets
Made for Bedrooms, dressing rooms, walk-ins, reach-ins, mudrooms Kitchens; tall pantries and drawer bases adapt to closets
Box 1" furniture board, melamine interior, 3/8" MDF back ½" plywood sides and back, ¾" plywood shelves
Doors Four slab styles: Clayton, Fontana, Luce, Cava Shaker, in the Galaxy finishes
Finishes Ten, in texture melamine and super matte The Galaxy range, white to oak to color
Hanging clothes Designed in, with aluminum interior fittings No rod part; we hang clothes in open bays
Lighting Integrated LED strip Add-on LED accessories
Price Quoted per project Fixed prices on our site
Shipment time Typically 4–6 weeks from final design approval Typically 2 weeks
Door sample $35 per door style $35

Neither is "better" across the board. Furniture board with melamine is the standard material for closet systems, and it is stable in a dry bedroom; plywood boxes earn their premium near water, which a closet is not. Our melamine cabinet guide and furniture board vs plywood comparison cover the materials in depth.

Matching is the practical tiebreaker. If the closet opens off a bathroom with Galaxy vanities, or a mudroom in the same finish, the kitchen-cabinet route keeps one door style through the house.

What Is the St. Martin Wardrobe Closet Program?

The St. Martin Wardrobe Closet program is a built-to-order closet and wardrobe system that extends St. Martin's cabinetry into bedrooms, dressing rooms and mudrooms, designed around your measurements and quoted per project. St. Martin lists its construction on the Wardrobe Closet product page:

Bright walk-in dressing room lined with flat slab-door wardrobe cabinets in a light oak-look finish, open hanging sections with built-in LED strip lighting and thick white shelves
A built-to-order closet system: thick furniture-board shelves, slab doors, aluminum fittings and integrated LED strips, designed around hanging clothes.
  • Shelves, sides, floor and ceiling: 1-inch furniture board with melamine interior finishes.
  • Doors: ¾ inch thick, in four slab styles: Clayton, Fontana, Luce and Cava.
  • Back and toe kick: a 3/8-inch MDF back and a ¾-inch furniture-board toe kick.
  • Fittings: premium aluminum interior fittings and pocketed, flush adjustable shelf clips.
  • Lighting: a built-in, fully integrated LED strip.
  • Finishes: ten, in texture melamine and super matte: Ash, Ecru, English Oak, Epping Wood, Sienna, Teak, Vanilla White, Sabbia, Fiat Grey and Raven Black.

The 1-inch shelves are the detail to notice. Closet shelves carry stacks of sweaters and shoes across long spans, and a thick shelf resists sagging better than a thin one. The wood-look finishes such as English Oak and Teak are surface finishes on furniture board, not solid wood, so they wipe clean, but they cannot be sanded or refinished like a wood door.

Because every Wardrobe system is built to order, there is no price list: we quote it from your room's measurements and a 3D design. It typically ships in 4–6 weeks from final design approval. Door samples are $35 per door style from our St. Martin sample page, and the Wardrobe Closet page shows all four doors. Our St. Martin review covers the brand's kitchen series and warranty.

Can Kitchen Cabinets Be Used as a Wardrobe?

Kitchen cabinets can be used as a wardrobe for folded clothes, shoes, bags and bedding, and drawer bases make a sturdy built-in dresser, but they are a poor home for hanging clothes inside the box. Two facts from the Fabuwood spec book explain why.

First, depth: a 24-inch-deep Galaxy tall pantry has 21-inch-deep shelves, a little under the 22 inches Hunker gives as the minimum for hanging. Second, there is no closet-rod part in the Allure spec book. Its warranty section says the warranty "shall become void if the cabinets, cabinetwork, drawer slides or hinges are modified from its original form," so, as our own caution rather than a Fabuwood rule about rods, we don't plan a rod screwed inside a cabinet. Instead, our plans leave an open bay between two cabinets and hang the rod on brackets fastened to the wall framing.

These are the Galaxy Frost boxes that do the wardrobe work. Prices are what our product pages charge after the 35% Fabuwood discount, checked November 13, 2026; the cart is the final word.

Box Code Size (W × H × D) Inside Our price
Tall pantry, one door TP182490 18 × 90 × 24 Six adjustable shelves, 21" deep $1,108.25
Tall pantry, two doors TP242490 24 × 90 × 24 Six adjustable shelves, 21" deep $1,326.00
Tall pantry, two doors TP302490 30 × 90 × 24 Six adjustable shelves, 21" deep $1,641.25
Tall pantry, two doors TP362490 36 × 90 × 24 Six adjustable shelves, 21" deep $2,031.25
Three-drawer base DB30 30 × 34½ × 24 Three drawers $845.00
Three-drawer base DB36 36 × 34½ × 24 Three drawers $1,030.25
Wall cabinet, 24" deep W361524 36 × 15 × 24 Two doors, for over a hanging bay $403.00
Roll-out drawer ROD-B24 BLUM E For a 24"-wide cabinet One pull-out tray $214.50

Tall pantries come 84, 90 or 96 inches tall, and the 84- and 96-inch versions suit lower or higher ceilings; our wall and tall cabinet size guide lists every width. A finished side for a 24-inch-deep pantry, where its side shows, adds $169.00. The code TP242490 reads as 24 wide, 24 deep and 90 tall; our guide to reading cabinet SKU codes decodes the rest.

The roll-outs are what turn a pantry into a wardrobe tower. The Allure spec book lists roll-out drawers for its 24-inch-deep pantries and says they can be used in pantries; each is sold singly, and your designer confirms the size and count on the quote. A pull-out tray brings folded sweaters or shoes to the front, where a 21-inch fixed shelf hides the back row. Our cabinet organizers guide compares the options.

Galaxy drawer bases have 5/8-inch solid-wood dovetail drawer boxes on Blum full-extension, soft-closing runners, per the Allure spec book, so a run of them makes a dresser that outlasts most furniture. Our drawer base cabinet guide covers the drawer heights.

Plan 1: A 96-Inch Wardrobe Wall

A 96-inch wardrobe wall built from Galaxy Frost cabinets fits an 8-foot bedroom wall with two tall towers, a 36-inch hanging bay between them and a wall cabinet above the rod, for $4,817.15 in cabinets and trim. It replaces a reach-in closet or turns a blank wall into one.

The plan runs wall to wall, left to right, with the wall cabinet over the bay hung at 75 to 90 inches so its top lines up with the towers:

Run Left to right Adds up to
Floor to 90" TF396 3 · TP302490 30 (finished right side) · open hanging bay 36 · TP242490 24 (finished left side) · TF396 3 96"
Over the bay W361524 36, at 75" to 90" 36"

The wardrobe wall prices out like this:

Item Qty Price
TP302490, right side finished 1 $1,810.25
TP242490, left side finished 1 $1,495.00
W361524 wall cabinet 1 $403.00
ROD-B30 BLUM E roll-out 2 $455.00
ROD-B24 BLUM E roll-out 2 $429.00
TF396 tall filler 2 $169.00
TK8 toe kick 1 $55.90
Total $4,817.15

The hanging bay takes a single rod at about 66 inches, which leaves 9 inches below the wall cabinet for hangers and full-length garments below. The rod, its brackets and the bay's back-wall finish are not in the total; they come from a hardware or closet supplier, and the brackets go into studs or blocking in the wall, not into the cabinets.

Each tower gets two roll-outs at the bottom for shoes and bags, and the remaining shelves hold folded clothes. For more hanging and less shelving, swap the 30-inch tower for an 18-inch TP182490 and widen the bay to 48 inches; Galaxy's standard double-door wall cabinets top out at 39 inches wide, so give that wider bay a shelf on brackets above the rod instead of a cabinet.

Plan 2: A Built-In Dresser for a Walk-In Closet

A built-in dresser for a walk-in closet uses three 30-inch drawer bases across a 96-inch wall, for $2,642.90 in Galaxy Frost cabinets and trim, giving nine full-extension drawers under a countertop.

Walk-in closet back wall with a built-in dresser of three white shaker three-drawer base cabinets under a pale quartz top, one drawer open showing folded shirts, a round mirror above
Plan 2: three 30-inch drawer bases make a 96-inch built-in dresser with nine full-extension drawers.
Item Run or qty Price
Run, wall to wall BF3 3 · DB30 30 · DB30 30 · DB30 30 · BF3 3 = 96"
DB30 three-drawer base 3 $2,535.00
BF3 base filler 2 $52.00
TK8 toe kick 1 $55.90
Total $2,642.90

The top is 36 inches high with a 1½-inch countertop, a comfortable height for folding and for a valet tray. A remnant of quartz or a wood top from your fabricator finishes it; it is not in the total.

Above the dresser, keep the wall for a mirror, or hang 12-inch-deep wall cabinets 18 inches above the top as in a kitchen; clothes on a rod there would drape onto the counter. In a closet that also needs a tower, add one TP242490 at the end and shorten the dresser to two bases. Our guide to end panels and fillers explains the 3-inch fillers at each wall, which let the drawers clear the side walls.

How Do You Lay Out a Walk-In Closet With Cabinets?

Lay out a walk-in closet by adding the depth of each run to a clear passage of at least 24 inches: one 24-inch run needs a closet about 48 inches wide, and runs on both side walls need about 72. Hunker gives the same thresholds: a walk-in at least 4 by 4 feet, and about 6 feet of width for storage on both side walls and the back.

Infographic of walk-in closet widths in plan view: 24 plus 24 equals 48 inches for hanging on one wall, 24 plus 24 plus 24 equals 72 inches for hanging on both walls
Add 24 inches of depth for each hanging run to a 24-inch passage: about 48 inches for one wall, about 72 for both.

A few rules from those numbers:

  • Narrow walk-ins, about 4 to 5 feet wide: hanging and towers on one long wall, and open shelves or hooks on the other. A 12-inch-deep shelf wall leaves a 24-inch passage in a 60-inch room.
  • Walk-ins about 6 feet wide: hanging on both side walls and a dresser or tower wall across the back. Put the Plan 2 dresser on the back wall, where its drawers open into the widest part of the room.
  • Islands: only in closets over about 10 feet wide, with at least 24 inches of walkway on every side, per Hunker. A single row of 24-inch-deep drawer bases with a finished panel on the back makes the island.
  • Corners: where two hanging runs meet, the corner is mostly dead. Turn one run into shelves, or stop the rod short of the corner, rather than buying a corner cabinet.

Doors change the math. ClosetWorld gives 36 inches of room in front of swing-open closet doors, more than the 24-inch walking minimum, and a tall cabinet door swinging into a narrow aisle has the same problem. In a tight walk-in, use open hanging bays and drawers rather than tall doored cabinets on both sides.

The same depth-plus-aisle arithmetic drives our walk-in pantry layouts, which work through it at four room sizes with cabinet codes.

What Fits in a Reach-In Closet?

A reach-in closet about 24 inches deep fits rods and shelves across the back, and a drawer base can go inside as long as it sits fully within the door opening. Hunker puts the return walls beside a reach-in's opening at 12 inches or less; a drawer behind a return wall cannot open.

One arrangement that works: a DB30 drawer base centered in the opening, with an upper rod above it at about 82 inches. Shirts hanging from that rod end about 40 inches below it, clear of the 36-inch top. The ends of the closet, behind the returns, take a long-hang rod at 66 inches on one side and shelves on the other.

The closet door matters as much as the inside. Bifold and sliding doors leave part of the opening covered at any moment, so check that the drawer base sits where the doors fully clear it. For converting a reach-in into fully built-in cabinets, with doors and trim instead of a closet door, see our guide to built-in cabinets from stock cabinets.

In new construction, the closet is easiest to plan before drywall, when blocking for rod brackets and wall cabinets can go in and the closet light can be placed for the shelves. Our guide to cabinets for new construction covers the timing.

Frequently Asked Questions

What is the difference between a wardrobe and a closet?

A closet is a space built into the walls of a room, while a wardrobe is a cabinet or system that holds clothes, freestanding or built in. Built-in wardrobe cabinets blur the line: they fill a wall or a closet with cabinets, rods and drawers. Both need about 24 inches of depth for hanging.

How deep should a wardrobe cabinet be?

A wardrobe cabinet for hanging clothes should be about 24 inches deep, and 28 inches for coats and bulky items. Under 22 inches is too shallow for hangers. Cabinets for folded clothes and shoes can be shallower.

What is the standard height for a closet rod?

The standard closet rod height is about 66 inches for a single rod. Double-hang rods go at about 40½ to 42 inches and 81¾ to 84 inches. Leave at least 2 inches between a shelf and the top of the rod.

Can you use kitchen cabinets in a closet?

Yes, kitchen cabinets work in a closet for drawers, shelves, shoes and bins. Drawer bases make a strong built-in dresser and 24-inch-deep tall pantries make storage towers. Hang clothes in open bays between them rather than inside a cabinet, since kitchen tall cabinets have no rod part.

How much does a closet built from cabinets cost?

A closet built from cabinets costs $2,642.90 for a 96-inch built-in dresser and $4,817.15 for a 96-inch wardrobe wall in Fabuwood Galaxy Frost, cabinets and trim only. St. Martin Wardrobe systems are quoted per project from your measurements. Countertops, rods and installation are extra.

What are closet systems made of?

Most closet systems, including St. Martin's Wardrobe program, are made of furniture board with a melamine finish. St. Martin uses 1-inch furniture board for shelves and sides and a 3/8-inch MDF back. Fabuwood Galaxy kitchen cabinets use plywood boxes instead.

Are cabinets with doors better than open closet shelving?

Cabinets with doors are better for keeping dust off folded clothes and for a calm, finished look; open shelving is cheaper and quicker to reach into. Many closets mix the two: open hanging, doored towers for out-of-season clothes, and drawers for small items.

How do you light a closet with cabinets?

A closet with cabinets is best lit from the front of the shelves or inside them, so you don't stand in your own shadow. St. Martin's Wardrobe program has a built-in LED strip. For a ceiling fixture, the electrical code sets clearances between closet lights and storage, so ask your electrician to place it.

How long do closet cabinets take to ship?

St. Martin Wardrobe systems typically ship in 4–6 weeks from final design approval, and Fabuwood Galaxy cabinets typically ship in about 2 weeks. Freight adds typically 1–7 business days. We ship to the 48 contiguous states only.

Get Your Closet Drawn

Send us the closet or wall's inside dimensions, the ceiling height, the door type and position, and a rough count of long and short hanging items. Our free 3D design service replies within two business days and usually returns a design and an itemized quote within 24–48 hours of getting your measurements. Door samples are $35 each and final sale: St. Martin Wardrobe doors or Fabuwood Galaxy doors.

Cabinets are made to order, and the sale is final once submitted; a cancellation before production is possible only if the manufacturer accepts it, with a restocking fee of typically 30%. We design, quote and ship cabinets to the lower 48 states; we do not install them. Your own contractor handles installation, and in New Jersey it is available through our sister company, Captivating Construction Group. Questions? Contact us or call (609) 900-3358.

Sources: St. Martin Cabinetry, Wardrobe Closet product page (construction, fittings, lighting, finishes, door styles); Fabuwood Allure spec book (box and drawer construction, roll-outs, warranty) and Galaxy Frost spec book in Fabuwood's EZ Pricing system (sizes, shelves, roll-outs); captivatingcabinets.com Galaxy Frost product prices after the 35% Fabuwood discount, checked November 13, 2026; Hunker, "What Are Standard Closet Dimensions?"; Bob Vila, "This Is the Perfect Height for a Closet Rod"; ClosetWorld, "All the Standard Closet Dimensions You Need to Know". Plan layouts and arithmetic are our own.

Found this useful? Share it
Add as a preferred source on Google
Noor K.

Written by

Noor K.

Technology Manager at Captivating Cabinets

Noor manages and develops the Captivating Cabinets website, and writes practical guides on cabinet styles, finishes, pricing, and remodel planning.

Your Cart

Your cart is empty.

Browse cabinets →
Free · No obligation

See your new kitchen before you spend a dollar

Send rough measurements and a few photos. A designer replies within 2 business days, and you get photorealistic 3D renderings with an itemized quote in 24–48 hours.

Contractors get trade pricing. Have a quick question? Ask Cabinets AI →

Kitchen designed with the free 3D design service from Captivating Cabinets