
Recessed panel cabinet doors have a four-piece frame around a thinner center panel that sits back from the frame's face, so you see a stepped border with a shadow line on all four sides. The step can be a plain square edge, which is the shaker door, or it can carry a bevel, an ogee curve or a bead, and the panel can be MDF, HDF, veneered board or solid wood. Those two choices, the profile at the step and the material in the middle, decide how the door looks, how it ages, what it costs and how easy it is to keep clean. This guide goes through both, compares the style with raised and slab doors, and names the door styles in our own catalog that use it.
We sell cabinets for a living, and this is the door construction behind most of what we ship. The questions we answer about it are rarely about looks. They are about the thin line that appears around a painted panel in January, whether an MDF center is a corner cut, and why one quote with a beveled door costs the same as another with a square one. Those are the questions this page is built to settle.
Key takeaways
- A recessed door is a four-piece frame around a flat panel that floats in a groove below the frame's face. Shaker is the square-edged version; bevel, ogee, bead and stepped edges are the others.
- Raised panels have a thicker, shaped center that rises toward the frame; slab doors have no frame at all.
- For paint, an MDF or HDF panel is the better choice, not the cheaper one: it does not shrink, so no bare strip appears around the panel in winter.
- Hairline "witness lines" at painted frame joints are normal wood movement, not a defect. Steady indoor humidity keeps them small.
- Price follows the series far more than the profile. Compare series against series on your own drawing.
Table of Contents
- How the Door Is Assembled
- Recessed, Raised and Slab Compared
- Inside-Edge Profiles: Square, Bevel, Ogee and Bead
- What the Center Panel Is Made Of
- Wood Movement and the Paint Line Around the Panel
- Cleaning the Recess Without Damaging It
- What the Style Costs Against Slab and Raised
- Choosing the Profile and Panel
- Recessed Panel Cabinet Doors in Our Catalog
- When a Different Door Makes More Sense
- Frequently Asked Questions
How the Door Is Assembled
In cabinetry, recessed panel is a construction term before it is a style term. It describes a frame-and-panel door in which the panel's face is lower than the frame's face. Four members form the frame: the vertical stiles on the left and right and the horizontal rails at top and bottom. A groove runs along the inside edge of all four, and the panel's edges sit in that groove.
The panel is deliberately left loose. Glue it in and a solid wood panel, which expands and contracts across its width as humidity changes, will either split itself or push the frame joints apart. Leaving it to float is the oldest trick in cabinetmaking and the reason these doors last. Many factories insert small rubber balls or foam strips into the groove before assembly; they keep the panel centred, stop it rattling, and compress as the panel swells.
The corner joints come in three common forms:
- Cope and stick. Matching router cutters shape the edge of the stile and a reverse of that shape into the rail end, so the pieces interlock. It is common in factory cabinetry. The glue surface is mostly end grain, which is why a good glue-up and clamping process matters.
- Mortise and tenon. A tongue on the rail fits a slot in the stile. More glue surface, slightly stronger, more machining. Fabuwood's spec book lists it for every Allure door, and US Cabinet Depot publishes its Haven and Oxford doors as mortise-and-tenon frames.
- Mitered. The frame pieces meet at 45 degrees, like a picture frame, which lets a decorative profile run continuously around the corner. USCD's raised-panel Casselberry door uses a mitered frame.
There is also a door that only imitates this construction: a single sheet of MDF with the "panel" routed out by a CNC machine. It has no joints to open and no panel to shrink, which makes it very stable under paint, but it is heavier and cannot be repaired by replacing a single part.
Typical finished door thickness for framed kitchen cabinets is ¾ inch, with some custom shops offering a full inch. The panel itself is much thinner, often ¼ to ⅜ inch for a flat engineered panel, which is why it can sit in the groove and still leave a visible step. Fabuwood publishes its Allure panel at ⅜ inch MDF inside solid wood frames; St. Martin's Heritage and NOMA doors use a ⅞-inch solid wood frame around an HDF panel.
Recessed, Raised and Slab Compared
Three families cover nearly every cabinet door sold. They differ in where the panel's face sits relative to the frame, and whether there is a frame at all.
| Recessed (flat) panel | Raised panel | Slab (flat door) | |
|---|---|---|---|
| Panel shape | Flat sheet set below the frame face | Thicker panel with a shaped border that rises to a flat central field near frame height | No frame; one flat piece |
| Typical panel material | MDF, HDF, veneered board or solid wood | Usually solid wood, since the border is carved into it; molded MDF on paint-grade doors | MDF, particleboard or plywood core with paint, laminate, veneer or foil |
| Look | Clean, adaptable from farmhouse to modern | Formal and traditional | Modern and minimal |
| Cleaning | One ledge per side to wipe | Several contours where grease settles | Easiest; one flat face |
| Seasonal movement | Low with engineered panels, moderate with solid | Highest; wide solid panels move most | Very low on engineered cores |
| In our catalog | The majority of door styles | J&K Traditional, USCD Casselberry, some Diamond and Decorá styles | Fabuwood Luxe and the Catalina doors on Illume and Ovela, among others |
The raised panel deserves a clearer description, because it is often confused with the recessed kind. Its panel starts thin at the edges so it fits the same groove, then climbs through a profile, commonly an ogee, a cove or a straight chamfer, to a thicker flat field in the middle. From a distance you see a pillow shape inside the frame. That extra thickness usually means solid wood, and solid wood that thick moves more.
Slab doors are a different animal and have their own buying guide: our slab cabinets guide covers core materials, edge banding and where flat doors struggle, and you can compare finishes side by side in our flat-panel (slab) cabinet shop and raised-panel cabinet shop. There are also hybrids. A door with vertical grooves cut into its panel, or a beadboard insert, is still a recessed panel in construction, and our sibling guide to v-groove and beadboard cabinet doors covers those.
Inside-Edge Profiles: Square, Bevel, Ogee and Bead
The profile is the shape cut along the inside edge of the frame where it drops to the panel. It is the single detail that shifts a door from modern to traditional, and it is easy to overlook on a small sample.
Square
A plain right-angle step. This is the shaker door, the most common square-edged version of the style and the one most kitchens choose. Rather than repeat it here, our shaker cabinets guide covers its variations, finishes and prices in detail, and the shaker cabinet shop lists every finish we stock.
Bevel or chamfer
The edge is cut at an angle instead of dropping straight down. The slope catches light, so the border reads softer than a square step. A rounded version, often called a pillowed bevel, softens it further. US Cabinet Depot sells both: Oxford has a wide, angled inside bevel around a flat recessed panel, and Haven has a soft pillowed bevel that reads warmer and rounder than a standard shaker.
Ogee
An S-shaped curve, concave then convex, cut along the frame edge. It is the classic traditional profile and pairs naturally with crown moulding, glazing and furniture-style details. On a recessed door it adds formality without the bulk of a raised panel.
Bead
A small half-round bead runs along the inside edge, sometimes with a narrow groove beside it. It is associated with cottage and period kitchens and with beaded inset construction, which puts the bead on the face frame instead. Our beaded inset explainer separates the two.
Stepped or double
Two or more square steps down to the panel, giving a double shadow line. It keeps a modern squareness while adding depth, and it is sometimes sold as a double or stepped shaker.
A practical point that affects every day of ownership: the more curves in the profile, the more places grease and dust lodge. A square or bevel edge wipes clean in one pass. An ogee or a bead needs a soft brush now and then. Glazed finishes deliberately settle a darker tint into those contours, which hides wear but makes a greasy film harder to see until it builds up.
What the Center Panel Is Made Of
Because the panel is thin and hidden inside a frame, manufacturers have freedom to choose its material by finish rather than by tradition. The general pattern across the industry is simple: paint-grade doors get engineered fiberboard, stain-grade doors get a real wood face.
| Panel material | Best for | Strengths | Watch for |
|---|---|---|---|
| MDF | Painted doors | No grain, so no seasonal shrinking; smooth, even paint surface; affordable | Swells if water reaches a chipped edge; heavier than wood |
| HDF | Painted doors, thinner panels | Denser and harder than MDF, resists dents; holds crisp machined edges | Same moisture caution; heavier still |
| Veneered MDF or plywood | Stained doors | Real wood face on a stable core; grain can be matched to the frame | Thin veneer limits deep sanding during a refinish |
| Solid wood | Stained doors, traditional work | Authentic grain and edges; can be refinished repeatedly | Moves with humidity; shows a paint line if painted after assembly |
| Glass, mesh or cane | Display uppers | Lightens a run of wall cabinets | Needs a retainer strip rather than a groove; tempered glass recommended |
An engineered panel is not a sign of a cheap door. It is the choice a finish engineer makes for paint, because a board that does not move keeps the paint film intact. What matters more is what surrounds it: a solid wood frame with a fiberboard panel is standard across mid-range and premium lines. Doors that are fiberboard throughout, frame included, sit at the budget end, and that trade-off deserves to be stated on the quote. Our HDF cabinet doors guide explains how fiberboard is made, how MDF and HDF differ in density, and which of our lines use each.
US Cabinet Depot's Haven series shows the rule in action inside a single door style. Its three painted finishes, Dune, Sage and Harbor, are HDF doors with no grain, while the two stains, Ember and Ridge, are real wood with visible grain. Same profile, different material, chosen by the finish. If glass is the direction you are leaning for a few uppers, our glass cabinet doors guide covers frame styles and glass types.
Wood Movement and the Paint Line Around the Panel
Almost every complaint we hear about a recessed door traces back to one physical fact: wood changes size with moisture, and it does so very unevenly depending on direction.
Along its length, normal wood shrinks only about 0.1 to 0.2 percent from green to oven-dry, according to the American Wood Council's summary of the USDA Wood Handbook. Across the grain it is a different story: tangential shrinkage (parallel to the growth rings) runs to several percent over the same range, typically about double the radial figure, depending on species. The working rule from the same sources is roughly a 1 percent change in width for every 4 percentage points of change in moisture content. Indoor wood cycles through a few points of moisture content between a humid summer and a heated winter.
Apply that to a door. A 12-inch-wide solid wood panel that swings four points in moisture content can change width by about an eighth of an inch. That is exactly the movement the floating groove is designed to absorb, and it produces two visible effects.
The paint line
If a solid wood panel is painted after the door is assembled, the part of its edge hidden inside the groove never receives paint. In a dry winter the panel shrinks, its edge draws out of the groove, and a thin strip of bare wood appears along one or both sides. It looks like a defect.
It is really the finishing sequence showing through. Better factories prevent it by finishing panels before assembly, and many avoid it altogether by using MDF or HDF, which do not shrink seasonally. On stained solid panels the same shift reveals a pale strip for the same reason.
Witness lines at the corners
The second effect is at the frame joints. Rails run horizontally and stiles vertically, so at each corner one piece is moving across its grain while the other hardly moves at all. Paint is not elastic enough to bridge that indefinitely, and a hairline often forms along the joint.
The industry term is witness line. It is cosmetic and it does not loosen the door. Warranties treat it as the nature of wood: J&K's, for one, calls hairline cracks unavoidable in wood cabinets and excludes them, and Diamond's humidification guide warns that open or closed joints are more prominent on painted cabinetry. It shows most on dark and saturated paints and almost disappears under stain.
Reducing both
- Choose an engineered panel for any painted door; that removes the paint-line risk entirely.
- Keep indoor relative humidity steady; Diamond, for example, recommends 30 to 55 percent when outdoor temperatures are between 50 and 85°F.
- Let the cabinets acclimate in the room before installation rather than in a cold garage or a damp basement.
- Expect the first heating season to be the most active, while the wood settles to your house.
- If a hairline would bother you every day, choose a stain, a light paint, or a door whose frame is engineered too.
Cleaning the Recess Without Damaging It
The ledge where panel meets frame is the one maintenance difference from a slab door. On a base cabinet next to the range it collects a fine film of cooking grease that, left alone, turns tacky and grey. A short routine prevents that.
- Dust the ledge weekly with a clean, dry, soft paintbrush or a folded microfibre cloth. Work along the bottom edge of the top rail, where most of it lands.
- For grease, mix a few drops of mild dish liquid into warm water. Dampen a lint-free cloth, wring it until almost dry, and run it along the step with a fingertip behind it.
- Follow with a cloth dampened in plain water, then dry the ledge completely. Standing water in the corner is what eventually lifts paint or swells an exposed fiberboard edge.
- For a profiled edge such as an ogee or bead, use a soft toothbrush with the same diluted solution; never a stiff brush.
- Skip ammonia, bleach, scouring powders, abrasive pads, melamine erasers and silicone polishes; each can dull or cut through a factory finish.
Our cabinet cleaning and care guide covers the rest of the cabinet, including interiors and hardware.
What the Style Costs Against Slab and Raised
There is no universal premium for a recessed door, and anyone who quotes one without seeing a layout is guessing. Three things actually decide the number.
The series, far more than the profile. In stock and semi-stock cabinetry the door is part of a series, and the series is priced as a package with its box, finish and hardware. Fabuwood's framed Allure range shows it: a real 10×10 layout typically runs $4,400 to $7,500, with the square-edged Galaxy at the entry end and the wide-rail Fusion recessed door in the middle. (Galaxy's fixed 10×10 package displays at $4,400, but that is a set box list, not a drawn kitchen.) Same brand, same box, different series price. US Cabinet Depot's shaker kitchen, by contrast, typically lands at $2,900 to $4,500 for a 10×10 in RTA form at our pricing.
Material thickness and machining. Among custom and made-to-order door makers, a raised panel usually costs more than a flat recessed one because it needs thicker solid stock and extra shaping. A slab can go either way: a painted MDF slab is often the cheapest door in a range, while a wood-veneered slab with grain matched across a run of drawers can be one of the most expensive.
Finish. Glazing, specialty stains and custom colours add cost regardless of profile.
So the useful comparison is not recessed versus slab in the abstract. It is this series against that series, on your drawing. Our cabinet cost guide walks through the rest of the budget, and contractors can apply for trade pricing through Captivating Pro.
Choosing the Profile and Panel
Two decisions define the door: the edge at the step and the material in the middle. Make them in that order, then check the result against your climate and your cleaning habits.
| What you want | Profile | Panel | Doors to look at |
|---|---|---|---|
| Clean, flexible, works with any hardware | Square | MDF for paint; veneer or solid wood for stain | Fabuwood Galaxy, USCD Shaker, KCD Shaker, Tribeca Hudson |
| Softer than shaker, not yet traditional | Bevel or pillowed bevel | Engineered for paint (Haven's painted finishes are HDF) | USCD Oxford, USCD Haven |
| A wider, more substantial frame | Wide rail, square | Engineered | Fabuwood Fusion |
| Traditional detail without a raised panel | Ogee or bead | Engineered for paint, solid for stain | Ask about individual Diamond and Decorá styles |
| Modern, with a slimmer frame | Square, narrow rails | Engineered for paint | Modernform Slim Shaker |
| Furniture-grade flush fronts | Any, on an inset box | HDF inside a solid frame | St. Martin Heritage |
Then run three checks before you order:
- Look at the step on a sample, at an angle. A straight-on photo flattens a bevel into a square edge. Door samples show the real shadow line in your own light.
- Ask what the panel and the frame are made of, separately. A solid wood frame around a fiberboard panel is normal. A frame of fiberboard too is a budget construction worth knowing about.
- Match the finish to your humidity. In a house that swings from a humid summer to a dry heated winter, a dark paint on a wood frame is the combination most likely to show witness lines. Stain or a lighter paint hides them.
Recessed Panel Cabinet Doors in Our Catalog
Most door styles we sell are built this way, so the useful question is which profile and which panel each one uses. The table groups them by profile, using the construction each manufacturer publishes. Where a brand does not state its panel material, the cell says so.
| Door style | Profile at the step | Panel and frame | Finishes |
|---|---|---|---|
| Fabuwood Galaxy, Echo | Square (shaker) | Solid wood frame, ⅜″ MDF panel | Galaxy 15; Echo on our site in Dove, Mocha, Timber |
| Fabuwood Fusion | Wide-rail transitional, full overlay | Same Allure door spec | Dove, Oyster, Kona, Stone, Timber |
| US Cabinet Depot Shaker | Square (shaker) | Solid birch frame on the stained finishes | 11, from White to Essence Oak and Unfinished |
| US Cabinet Depot Oxford | Wide angled inside bevel, mortise-and-tenon frame | Solid birch frame on the stained finishes | 5, from bright white to warm toffee |
| US Cabinet Depot Haven | Pillowed inside bevel, mortise-and-tenon frame | Painted finishes are HDF; stains are real wood | Dune, Sage, Harbor, Ember, Ridge |
| Tribeca Soho | Clean, minimal recessed panel, full overlay | Solid wood face frame behind the door | Snow White, Empire Blue |
| Tribeca Hudson | Square (shaker), full overlay | Solid wood face frame behind the door | Snow White, Cloud White, Heatherstone, White Rift Oak, Cashew |
| Tribeca Americana | Five-piece, slab drawer fronts | Painted ¾″ HDF frame with a ¼″ MDF center panel | Snow White |
| J&K Transitional | Balanced recessed panel | Solid wood frame; J&K's spec book lists a plywood center panel for the E-series (Dove E1, Charcoal E2, Sage E3); RTA or assembled | 11, including Dove E1, Sage E3 and Naval B7 |
| J&K Contemporary | Flat-panel shaker | 100% solid wood door; RTA or assembled | White Shaker S8, Castle Grey S5, Java Coffee S1 |
| Modernform Shaker, Slim Shaker | Square; Slim has narrow rails | All-wood; panel material not published | Shaker in several colours; Slim in Dove White, Sage Green |
| KCD Shaker and Essential | Square (shaker) | Shaker: solid wood stiles and rails, MDF panel; Essential: HDF stiles and rails, MDF panel (KCD spec book) | Shaker: Designer White, Sand, Espresso, Kodiak, Moss; Essential: White, Gray |
| Mantra Omni and Classic | Square, 2¼″ rails | Not stated in Mantra's spec book | Omni 7; Classic in Snow |
| St. Martin Heritage | Inset; shaker, beaded and slab styles | ⅞″ solid wood frame, HDF panel | 49 across the line |
| NOMA Frame | Lakeland 1 frame profile on a frameless box | ⅞″ solid wood frame, HDF panel | White Dove, Nordic Oak |
| Diamond | Vibe alone lists 27 styles across shaker, recessed and raised panel | Varies by collection and door; confirm on the quote | Varies by door |
| Decorá | Core styles range from raised panels to flat designs; five-piece, inset and beaded inset groups | Semi-custom, made in Jasper, Indiana | Varies by door |
For contrast, the dedicated raised-panel series in our catalog, besides individual Diamond and Decorá door styles, are J&K's Traditional series with its glazed, multi-step molded doors and USCD's Casselberry, the only raised-panel series in that brand's framed lineup, with a mitered frame and a raised center panel.
Two practical notes. Fusion, Oxford and Haven are the ones to look at if a plain square edge feels too stark but a raised panel feels too formal; all three sit between the two. And if you like a recessed door but want to see it on the real finish before ordering, the door sample shop carries samples for every brand we sell. The brand pages for Fabuwood Allure and US Cabinet Depot show those doors in every finish, and the reviews go further on each line: see our US Cabinet Depot review, Tribeca review and J&K review.
When a Different Door Makes More Sense
This construction suits most kitchens, which is why it dominates. It is still the wrong answer in a few situations, and saying so saves people from a door they will resent.
- You want a completely seamless, handle-free wall. A slab door gives an uninterrupted surface; any recessed frame breaks it into outlines.
- The cabinets will get heavy grease exposure and little cleaning. A rental, a busy family kitchen with a gas range and no hood, or a commercial prep area will fill those ledges. A slab or laminate door is kinder.
- The design is formal or period. A raised panel with an ogee edge, or an inset door, carries more weight than a flat panel can.
- You want a very dark, saturated paint in a climate with big humidity swings. A painted wood frame will likely show witness lines there. Consider a stain, a lighter colour, or a door engineered throughout.
- You plan to reface rather than replace. Replacement recessed doors must match your existing overlay and hinge boring, which is harder than it sounds on older face frames. Have them measured, not guessed.
If you are torn between a square-edged door and a flat one, our shaker vs slab comparison weighs them on cleaning, resale and style range, and the transitional cabinets guide shows how profiled recessed doors like Fusion fit a middle-ground kitchen.
Frequently Asked Questions
What is a recessed panel cabinet door?
It is a frame-and-panel door: two vertical stiles and two horizontal rails around a flat center panel that sits lower than the frame's face. The panel floats in a groove cut into the inside edges of the frame, so it can move with humidity without cracking the door. The step between frame and panel can be square, beveled, ogee, beaded or stepped.
What is the difference between recessed and raised panel doors?
A recessed panel is a thin, flat sheet sitting below the frame. A raised panel is thicker and shaped: its edges thin down to fit the groove, then climb through a profile to a flat field near the frame's height, giving a pillowed look. Raised panels read more formal, are usually solid wood, move more with the seasons and have more contours to clean.
Is a shaker door a recessed panel door?
Yes. Shaker is the best-known recessed door, defined by a plain square step between frame and panel and no decoration. Every shaker door is a recessed panel door, but not every recessed door is shaker: add a bevel, an ogee curve, a bead or a double step at the inside edge and it becomes a different style on the same construction.
Is "flat panel" the same as "recessed panel"?
In door catalogs, usually. "Flat panel" describes the panel's shape and "recessed" describes where it sits, and a flat panel inside a frame is nearly always recessed. The catch is "flat door" or "flat-panel cabinets" on some sites, which can mean a slab with no frame at all. When in doubt, ask whether the door has separate stiles and rails.
Are recessed panel doors still in style?
They remain the mainstream choice. Square-edged shaker versions dominate stock and semi-stock catalogs, including most of the lines we carry, and they sit comfortably in farmhouse, transitional and modern kitchens. The change in recent years has been in the details: narrower rails for a slimmer look, wider rails for a heavier one, and beveled edges for people who find a plain shaker too stark.
Is an MDF center panel a sign of low quality?
No. For a painted door it is the better engineering choice, because MDF does not shrink and swell with the seasons and so the paint film around the panel stays intact. Judge quality by the frame and the box instead. A solid wood frame around an MDF or HDF panel is standard in mid-range and premium lines; a frame made of fiberboard too is the budget version.
Why is there a thin unpainted strip around my door panel?
That is a solid wood panel that was painted after assembly. In dry winter air it shrinks across its width and pulls a section of unpainted edge out of the groove. It usually narrows again when summer humidity returns. Keeping indoor humidity steady helps; the lasting fix is a door with an engineered panel, or panels finished before the door is assembled.
Can I paint existing recessed panel doors?
Yes, and it is a common refresh. Clean off grease thoroughly, scuff-sand, prime with a bonding primer, and paint with the doors off and flat. Work paint into the corner where panel meets frame with a small brush before rolling the flat areas. If the panels are solid wood, expect a seasonal hairline at the panel edge, since the paint will bridge frame and panel.
Do recessed doors cost more than slab doors?
Not reliably. In stock and semi-stock lines the series sets the price far more than the profile does, because door, box and finish are priced as one package. A painted MDF slab is often the cheapest door in a range, but a wood-veneered slab with grain matched across a run of drawers can cost more than a painted five-piece door from the same maker.
Can the center panel be glass instead of wood?
Yes. Glass, metal mesh or cane can replace the wood panel, usually held from the back with a removable retaining strip rather than trapped in a groove, so a broken pane can be replaced. Tempered glass is the safer choice in a kitchen, and a few glass uppers in an otherwise solid run keep the display from looking cluttered.
See It Drawn in Your Kitchen
We're builders who sell cabinets, and we would rather you choose the right door than the most expensive one. Send us your measurements and we will return a free 3D design and an itemized quote through our design service, with the profile, panel material and finish spelled out line by line.
Prefer to talk it through? Reach us on the contact page or call 609-900-3358 and ask which recessed door suits your finish and climate.
Sources: American Wood Council summary of the USDA Forest Products Laboratory Wood Handbook (shrinkage and moisture content); Diamond Cabinets humidity guidance; J&K Cabinetry warranty terms; published door specifications from Fabuwood, US Cabinet Depot, KCD, St. Martin and Tribeca.

Written by
Noor K.Technology Manager at Captivating Cabinets
Noor manages and develops the Captivating Cabinets website, and writes practical guides on cabinet styles, finishes, pricing, and remodel planning.
Get a free 3D design + quote
- Your layout rendered in 3D, with an itemized quote
- Back in 24–48 hours
- Free, and yours to keep either way
Recent Articles

November 16, 2026
Kitchen Remodel Timeline: Every Step in Order, Week by Week

November 16, 2026
Cabinet Door Bumpers and Door Stops: Sizes, Placement and Restrictor Clips

November 16, 2026
Victorian Kitchen Cabinets: Real History, Door Styles and Ideas

November 15, 2026
Cabinet Joinery Explained: The Joint Behind Every Part of a Kitchen Cabinet

November 15, 2026
Cabin Kitchen Ideas: Rustic Cabinets That Work With Log and Wood Walls


