Galaxy Dove cabinet door
Bun Feet Cabinets icon
Fabuwood · Allure · Galaxy

Galaxy Dove Bun Feet Cabinets

Shop Galaxy Dove bun feet cabinets from the Fabuwood Allure Galaxy series at Captivating Cabinets.

2 cabinets in Bun Feet Cabinets · Galaxy Dove

Fabuwood Allure Galaxy Dove Taper Bun Feet For Platform | GD TBF
GD-TBFFabuwood Allure Galaxy Dove Taper Bun Feet For Platform | GD TBFBun Feet · Assembled
$42.90
-35%
$66.00
1
Fabuwood Allure Galaxy Dove Cove Bun Feet For Platform | GD CBF
GD-CBFFabuwood Allure Galaxy Dove Cove Bun Feet For Platform | GD CBFBun Feet · Assembled
$42.90
-35%
$66.00
1

Fabuwood Galaxy Key Features

Door Style
Solid wood door frames with ⅜” MDF center panel
Box Construction
½” veneered plywood construction
Drawer Glide
Tandem plus Blumotion full extension concealed drawer runners
Drawer Head
5-piece recessed panel drawer fronts
Drawer Construction
⅝” solid wood drawer box with dovetail construction
Hinge
Hinges feature Quick-Release Technology with Blumotion Soft-close
Cabinet Interior
Natural wood veneer finished interior
Cabinet Exterior
Pre-assembled
Assembly Method
Dowels and glue / Pocket screw Joinery
Delivery
7 Days – 3 Weeks · Pre-assembled

From the floor up: the parts list for a Galaxy Dove vanity on bun feet, and which foot goes with which hardware

Reviewed September 2026 · Captivating Cabinets

Two feet are listed and both are $42.90: GD TBF with a tapered profile, GD CBF with a cove. Neither screws into a cabinet. They fasten to a platform, the platform carries the vanity, and the vanity carries the top — so Galaxy Dove bun feet are the bottom line of a four-line parts list, and the mistake we see most is buying that bottom line twice. Here is the list in order, the height it adds up to, and a way of choosing between the two profiles by the hardware you have already picked for the doors.

The parts list for a footed 36-inch vanity, from the floor up

Labelled diagram of cabinet parts
Foot, platform, box, top — four lines, one finished height.
A 36″ vanity on loose feet (displayed prices)
LinePartPriceNote
1 — feetGD TBF or GD CBF, four of them$171.60Only under a flat platform. Delete this line entirely if the platform code ends TF or CF.
2 — platformGD SPF V36 (shaker) or GD VPF V36 (Vera), flat$253.50Sized to the vanity, never to the room.
3 — vanityGD VSB36-34 sink base$490.75Or the 36″ sink-and-drawer combo, GD VSD36DL or DR, at $783.25.
4 — topFrom the fabricator—Templated only after lines 1 to 3 are standing in place.
Lines 1–3 together$915.85Against $913.25 for the same vanity on a factory-footed GD SPTF V36.

The $2.60 between the last two rows tells you what a footed platform is: the flat one with these feet already on it. So loose feet are for three situations — a flat platform you already own, a profile you want to swap, or a spare. If the platform on the quote ends TF or CF, this page has nothing to sell you. Those platforms live on the side panel (platform) page, under a title that means plinth.

One number to confirm: the listing never says whether the $42.90 line is a single foot or a set of four. We have priced four singles above; ask us what a line buys before the order goes in.

Taper or cove, chosen by the pull you already picked

Brass cabinet pull on a painted shaker door
The foot and the pull are the two pieces of jewellery on a vanity. They should agree.

Same price, same mounting, so decide by what is on the door. In Fabuwood's own description the taper is the contemporary foot — it narrows toward the floor the way a plain leg does — while the cove is the traditional one, curving inward the way case furniture does.

  • Brass or bronze pulls: either foot works. The cove with brass is the painted-furniture look, and this off-white carries it more convincingly than a bright white does.
  • Matte black pulls: taper only. Black hardware is the graphic, modern move that Dove can take and the beige Linen cannot, and a curved cove foot under black bar pulls looks like two different rooms.
  • Nickel or chrome: taper. Cool metal wants the plainer foot.
  • An onlay in the plan: choose feet or ornament, not both. Two ways of calling a vanity furniture is one too many.

What the feet add, and who checks it

Distributor listings give each foot as 4″ by 4″ by 4″. Put the roughly one-inch platform on top and the sum is the 5″ the footed assemblies are catalogued at. Under a 34½″ box plus a countertop, the deck lands close to 41″, which is not a height any bathroom vanity should finish at. We cannot verify which box Fabuwood designed these assemblies to sit under, so tell us which box, platform and top you are considering and we will check the sum against the spec book.

What you see under it

Feet trade the toe kick for four inches of visible floor. You end up standing an inch or two back from the bowl, which nobody notices at a bathroom vanity, and a mop gets under a vanity that has open floor beneath it, which everybody notices. In a small bath the floor running beneath the vanity makes the room read larger, and a vanity on legs photographs as furniture — an off-white one photographs as a white bathroom with softer edges, which is what a listing photo wants.

The colour question at floor level belongs to the platform, not the feet, and the platform page works through it: white tile keeps the plinth reading white, grey tile is fine on this finish, and only a cool bulb over a blue-white floor pushes it grey. Lead time runs 7 days to 3 weeks, pre-assembled, with the limited lifetime warranty. The boxes themselves are listed under Dove vanities and every accessory under the vanity accessories range.

Common questions

Do Fabuwood bun feet attach to the cabinet?
No. They fasten to a platform, the plinth listed under side panels in this range, and the vanity stands on the platform. The load passes down through the plinth to the feet instead of hanging from the cabinet floor.
What is the full parts list for a vanity on feet?
Four feet, a flat platform sized to the vanity, the vanity, and a top templated after the first three are standing. For a 36″ sink base that is $171.60 plus $253.50 plus $490.75, or $915.85 — within $3 of the factory-footed platform route.
Should I use taper or cove feet with black hardware?
Taper. Matte black pulls read modern, and this off-white carries them well; a curved cove foot under them reads as a different room. Cove belongs with brass or bronze.
How much do four bun feet cost?
$171.60 if the $42.90 listing is a single foot, which it does not state. Confirm with us what one line buys before ordering four.
Does a footed platform already include the feet?
Yes. Any platform code ending TF or CF ships with taper or cove feet fitted, and it costs within a few dollars of a flat platform plus four loose feet. Do not order both.
How tall is a vanity with bun feet?
Each foot is 4″; with the platform the footed assembly is catalogued at about 5″. Stack that under a 34½″ box and a top and the deck is close to 41″, so ask us to confirm the box-and-platform pairing before ordering.

Keep reading

The guides behind the numbers on this page.

Get a free 3D design + quote

  • Your layout rendered in 3D, with an itemized quote
  • Back in 24–48 hours
  • Free, and yours to keep either way
Start my design

Still choosing the color? Order a Galaxy Dove sample and see it in your own light first.

On this page
  1. The parts list for a footed 36-inch vanity, from the floor up
  2. Taper or cove, chosen by the pull you already picked
  3. What the feet add, and who checks it
  4. What you see under it
  5. Common questions
  6. Keep reading
Cover of the Fabuwood Allure Galaxy Dove Specbook

Galaxy Dove Vanity Cabinets & Accessories Specbook & Guide

Every vanity cabinets & accessories code in Galaxy Dove: 117 items with sizes, list price, finished-side pricing and net price at 35% off, plus a buying guide. 11 pages.

Your Cart

Your cart is empty.

Browse cabinets →
Free · No obligation

See your new kitchen before you spend a dollar

Send rough measurements and a few photos. A designer replies within 1 business day, and you get photorealistic 3D renderings with an itemized quote in 24–48 hours.

Contractors save 20–40% off retail. Have a quick question? Ask Cabinets AI →

Kitchen designed with the free 3D design service from Captivating Cabinets