Galaxy Pistachio Green Cabinet Accessories

Most accessory lists are sorted the way a warehouse sorts them — inserts together, pull-outs together, lighting together. That order is convenient for stocking and useless for planning, because nobody decides to buy "a pull-out". They decide that the oils keep falling over beside the hob, or that the bin is under the sink and the recycling is in the garage. Those are station problems, and the fix for each is a particular box with a particular part in it.

So before anything is priced, mark the stations on the plan. The sink and dishwasher are one. The longest clear stretch of counter — usually between the sink and the range — is the prep run. The range and the space either side of it are the cooking station. Then the small ones: wherever the kettle, toaster or espresso machine will sit; the corner where two runs meet; and, if the house entertains, a spot for glassware. Each of those gets its own short section below.

All of these parts carry the GPG prefix on the accessories page, and they price the same as on the other standard Galaxy finishes. Quote the code exactly as the title writes it, spaces and all, and the order goes through without a query.

The single best-used accessory in most kitchens is the trash pull-out, and where it sits matters more than which one you buy. Put it on the side of the sink away from the dishwasher, so the person scraping plates and the person loading the rack are not both reaching for the same door. Scrape, rinse, load, in a line from one side to the other: the bin, the sink and the dishwasher in that order is the whole trick.

The pull-outs come in three widths. GPG TC15 BLUM is $617.50, TC18 BLUM $734.50 and TC21 BLUM $809.25, each also sold with an FHD suffix — one tall door instead of a door under a false drawer front — at the same price. The width you choose is really a question of how many streams you sort: a household that separates recycling and compost from general waste wants the widest box it can spare. The store titles do not say how many bins each width carries, so ask for that before choosing, rather than finding out on install day. The trash pull-out page has all six.

The sink base itself gets two small upgrades. The tilt-out tray, $162.50 at 11″, 14″ or 24″ (GPG TILTOUT 11″, 14″, 24″), turns the dummy front of the sink base into a shallow hinged trough for sponges and brushes. GPG UNDER SINK MAT, $156.00, lines the deck below the trap, where a slow drip does its damage unseen. Neither changes the cabinet, so both can be added later if the budget is tight today; the trash unit cannot, because it needs an empty base of its own width with no drawer box above it.

The prep run is where the top drawers do all the work, and where inserts earn their price. The loose trays are sold against a range of drawer widths, so one part covers two or three cabinet sizes: GPG CD-15/18 at $201.50, CD-21/24 at $273.00, CD-27/30 at $399.75 and CD-33/36 at $526.50 are the cutlery trays; GPG UT-15/24 at $227.50 is the utensil version; DPS-18/27 at $256.75, DPS-30/33 at $302.25 and DKI-18/24 at $214.50 are further layouts. What each divider pattern looks like is not described in the store titles, so ask to see it before choosing between two parts that fit the same drawer.

The BLUM-suffixed inserts are a different kind of object: they arrive with their own hardware rather than sitting loose in a drawer box. GPG DCD-15 BLUM is $354.25, DCD-18 $429.00, DCD-21 $468.00, DCD-24 $494.00, DCD-30 $581.75 and DCD-36 $676.00; the deeper DTD-DB30 BLUM and DTD-DB36 BLUM are $884.00 and $932.75. Two 18″ units, GPG CBKD-B18 BLUM at $672.75 and CHD-B18 BLUM at $1,111.50, are titled only as "18″W drawer insert with hardware". At that money, find out what they are laid out for before building a prep run around one.

Below the drawers, the prep run usually needs one deep base for mixing bowls, a stand mixer or a food processor. That is what the high roll-out is for. The number in the code is the cabinet width: GPG ROD-B24 BLUM H is $263.25, ROD-B30 BLUM H $279.50 and ROD-B36 BLUM H $286.00, while the standard-height E versions run $188.50 at 15″ up to $240.50 at 36″. A heavy appliance on a roll-out is a much easier life than a heavy appliance lifted off a low shelf.

A tray needs a shallow top drawer to live in. A 3-drawer base has one; a two-drawer bank does not. Decide which drawer holds the cutlery first and choose the base to suit, not the other way round. The drawer insert page lists them together.

The cooking station has one rule: anything you reach for while something is on the heat should be within a single step of the burner. That is oils, salt, spices, a spoon rest and the two pans you use every day. The parts that do it are the narrowest on the list, because the space beside a range is usually a filler strip that would otherwise be wasted.

Base filler pull-outs turn that strip into a tall, narrow rack. GPG SPO-BF3 is $334.75 for a 3″ gap and SPO-BF6 $380.25 for a 6″ gap; the BLUM soft-close versions are $585.00 and $695.50, and GPG TBPO-BF3 at $432.25 is a 3″ tray layout. The wall versions do the same above the counter, built to the height of the uppers beside them — GPG SPO-WF330 at $380.25 through SPO-WF342 at $432.25 in the 3″ width, and SPO-WF630 at $438.75 through SPO-WF642 at $497.25 in the 6″. Where there is a full 9″ or 12″ to spare instead of a filler, the base pull-outs take over: GPG SPO-B9 BLUM at $806.00, SPO-B12 BLUM at $919.75, TDPO-B9 BLUM at $672.75, and UPO-B9 and UPO-B12 BLUM at $880.75 and $1,030.25.

Pots go below, on roll-outs. A 36″ base with two standard-height roll-outs holds the everyday pans and lids; the high version is for stockpots. One detail specific to this station: the filler pull-outs have a painted face, and in a coloured kitchen they sit either side of the most photographed appliance in the room. They are manufactured with the doors, which is the reason to order them with the doors. A green face made weeks later, next to a green door made earlier, is a comparison the range puts in full view.

One part we would not chase: the slim filler pull-out, GPG SSPO-BF1-1/2, closes a gap under two inches for $1,313.00. If the plan leaves a gap that narrow, redraw the plan.

Small appliances are the biggest source of counter clutter in any kitchen, and on a coloured kitchen they are also the biggest source of visual noise: a black espresso machine, a chrome toaster and a white kettle in a row read as three different objects parked against the sage. The appliance garage hides them behind a door in the cabinet colour. GPG WAG2418 is a standard 24″ garage at $968.50; GPG WDCAG2418 does the same job across a corner at $757.25, which makes use of the dead diagonal where two counters meet.

Plan the garage around the tallest thing it has to hold and the socket it needs, and check the door clears the machine when it opens. The store titles give the width, not the clear opening height inside, so measure the machine and ask for that number before ordering.

Pods and capsules go in the shallow drawer below. GPG KCUP-18 is $224.25 for an 18″ drawer and KCUP-21/24 is $266.50 for a 21″ or 24″ one. A cutlery tray you already bought does roughly the same job, so this is a nice-to-have rather than a must, but a household that drinks a lot of pod coffee will use it every morning.

Where two base runs meet, one of them hides part of a cabinet behind the other. There are two fixes, and they suit different corners. A lazy susan base uses a rotating insert: GPG LSP24 30 at $227.50 and LSP24 36/42 at $341.25 are the plastic pie-cut versions, and the wood wedges run from LSW24 30 at $429.00 to LSW27 36/42 at $848.25. A blind base uses a pull-out that swings the hidden shelves out into the room: GPG BPO-BLB42/45-L or -R at $1,277.25 and BPO-BLB48/51-L or -R at $1,394.25.

The blind pull-outs are handed. The trailing letter records which side of the cabinet is hidden, and ordering the wrong one produces a mechanism that swings into the wall. The price is identical either way, so nothing on the quote flags a mistake. Read the hand off the corner base in the drawing, not off a photo of somebody else’s kitchen.

As for which is better: the lazy susan is cheaper and holds more small items; the blind pull-out keeps a straight run and suits heavy pans. Neither is visible once the door closes, so this is a pure function choice — there is no colour decision here at all.

Plenty of green kitchens have a second, quieter wall — a dresser run, a drinks corner, a butler’s-pantry stretch — where glassware lives. The stemware racks hang wine glasses by their feet under a wall cabinet: GPG STMW30 at $403.00 for a 30″ upper and STMW36 at $425.75 for a 36″ one. A puck set under the same cabinet makes the glass catch the light: $130.00 for a 30″ cabinet, $146.25 for a 36″.

This is also the station where wood does the most for a sage kitchen. A wood-housed light bar or floating shelf beside the rack brings in the warm tone that makes this green look deliberate, and it costs the same in Timber as in the standard housing. More on that under lighting, below.

Under-cabinet lighting runs across every station, so it is priced as a system. The bars come in 24″ to 60″ lengths — $487.50, $539.50, $617.50, $656.50, $698.75, $861.25 and $1,027.00 in the standard and Timber housings, and $585.00 to $1,098.50 in Walnut. Puck sets are sized to the cabinet above them, from $74.75 for a 9″ box (GPG LED W09) to $152.75 for a 39″ one (LED W39). A single 2-1/4″ puck is $71.50 and a 48″ interior strip is $221.00. Then the three parts that make any of it work: GPG LED DRIVER at $204.75, GPG LED WLS SWITCH at $221.00 and GPG LED MESH CONNECTOR at $201.50. Order bars without the driver and the switch and they arrive with nothing to power or control them.

One oddity worth flagging: the same FLS codes appear on the decorative list too, titled there as LED floating shelves rather than under-cabinet light bars, at the same prices. Confirm which object the code delivers before ordering it for a specific spot.

Now the colour question, which is real on this finish. A greyed sage is sensitive to the colour of light in a way a white door is not. As a general rule of colour, very warm bulbs push greys and grey-greens toward yellow, and on a sage that can read as olive; cooler, whiter light keeps it closer to the grey-green it is. Neither is wrong, but they produce two different kitchens. The tunable white strip, GPG LED STRIP TUNABLE WHITE 10MM at $286.00, lets you set the colour in the finished room instead of guessing from a spec sheet. Better still, get a door sample — $25.00 on the store — and look at it under your own bulbs at night before the lighting is ordered.

The housing matters too. A Timber or Walnut bar under sage uppers adds a thin line of wood along the underside of every cabinet, which is exactly the green-and-wood pairing this colour is usually shown with; the Timber housing costs the same as the standard one. The lighting page carries the full range.

Nobody needs every part on this list, and the honest way to budget is station by station, deciding at each one whether the complaint is worth fixing. Here is what a sensible first order looks like at each, using real codes and today’s displayed prices. Treat it as a starting point, not a recommendation to buy all of it.

If there is only budget for one station, make it the sink. A trash pull-out is used more times a day than anything else on this page, and it is the one part that cannot be retrofitted without a new cabinet. The corner is the one to economise on — the pie-cut susan does most of what the wood wedge does behind a closed door. Lighting is the one to phase: order the driver and switch now, and bars can follow.

If the plan is not drawn yet, send the room as it is. A free 3D design comes back with the stations marked and the parts priced against the boxes in the collection; a designer replies within one business day and the full design and quote follow within 24–48 hours.