Galaxy Nickel cabinet door
Fabuwood · Allure · Galaxy

Galaxy Nickel 9" Wide Base Cabinets

Shop Fabuwood Galaxy Nickel 9" wide base cabinets at Captivating Cabinets — every unit in this finish that measures 9" wide.

Search
Sub Type
All filters

2 cabinets in 9" Wide Base Cabinets · Galaxy Nickel

Fabuwood Allure Galaxy Nickel 9"W 12" Deep Base Cabinet | GN B09FD-12D
GN-B09FD-12DFabuwood Allure Galaxy Nickel 9"W 12" Deep Base Cabinet | GN B09FD-12DFull Height Single Door Base · 9.0"W · 34.5"H · 12.0"D · Assembled
$266.50
-35%
$410.00
1
Fabuwood Allure Galaxy Nickel 9"W Base Cabinet | GN B09FD
GN-B09FDFabuwood Allure Galaxy Nickel 9"W Base Cabinet | GN B09FDFull Height Single Door Base · 9.0"W · 34.5"H · 24.0"D · Assembled
$273.00
-35%
$420.00
1

Fabuwood Galaxy Key Features

Door Style
Solid wood door frames with ⅜” MDF center panel
Box Construction
½” select solid wood construction
Drawer Glide
Tandem plus Blumotion full extension concealed drawer runners
Drawer Head
5-piece recessed panel drawer fronts
Drawer Construction
⅝” solid wood drawer box with dovetail construction
Hinge
Hinges feature Quick-Release Technology with Blumotion Soft-close
Cabinet Interior
Natural wood veneer finished interior
Cabinet Exterior
Pre-assembled
Assembly Method
Dowels and glue / Pocket screw Joinery
Delivery
7 Days – 3 Weeks · Pre-assembled

Nine inches of base, and the hardware that costs three times the box

Reviewed September 2026 · Captivating Cabinets

Nine inches is the floor of the base board, and the catalogue here is short enough to read in one breath: GN B09FD at $273.00 on a full-depth box, and GN B09FD-12D at $266.50 on a twelve-inch-deep one. No drawer bank, no sink base, no corner unit, nothing else. What makes the width worth an article is not the cabinet at all — it is the price of what people want to put inside it.

The only width where the fittings outprice the carcass

Three base pull-out units are listed at this width, and every one of them costs more than either cabinet. That inversion does not happen anywhere else on the board: a 24-inch roll-out is a fifth of the box it slides into, but a 9-inch pull-out mechanism is two and a half to three times the cabinet.

The reason is mechanical rather than commercial. A pull-out is a chassis, a pair of runners and a set of shelves; none of that gets cheaper because it is narrow, and the narrow ones are built to a tighter tolerance. You are buying engineering, and engineering does not scale down in price.

Nine inches: the cabinets, and the parts sold to fill them
Part numberDisplayed priceWhat it is
GN B09FD-12D$266.50Full-height door on a 12-inch-deep box
GN B09FD$273.00Full-height door, full 24-inch depth
GNK TDPO-B9 BLUM$672.75A 9-inch base pull-out on Blum runners
GNK SPO-B9 BLUM$806.00A second 9-inch base pull-out unit
GNK UPO-B9 BLUM$880.75A third, the dearest of the set

The three pull-outs are listed as 9-inch base pull-outs and nothing further; the shelf counts and internal layouts are not published, and at a $208.00 spread between them that difference matters. Ask which is which before ordering — or see them alongside the rest of the pull-out organiser range where the photographs do more than a part number can.

Cabinet, filler, or filler with a rack in it

A nine-inch remainder can be closed three ways, and the money is not close. A base filler, GN BF3, is $26.00 for three inches and GN BF6 is $43.55 for six — two strips together close the gap for $69.55 and store nothing. The cabinet stores everything and costs $273.00. Between them sits the filler pull-out: GNK SPO-BF3 at $334.75 for three inches, GNK SPO-BF6 at $380.25 for six, with Blum-equipped versions of both at $585.00 and $695.50.

Our rule is about position rather than budget. Nine inches at the end of a run, behind where people stand, wants the cabinet. Nine inches immediately beside the cooktop wants the six-inch pull-out and a three-inch filler, because oils and bottles in arm’s reach are worth $406.25 and a shelf you have to crouch for is not.

What a narrow door looks like after two years

The smallest door in a kitchen is the one that gets knocked, kicked and grabbed with wet hands, and it is usually the one nearest the range. A mid-tone gray is forgiving about that in a way a bright white door is not — splashes and fingerprints sit down into the colour rather than standing out on it. It is also the door that shows dried water spots first, so the same cleaning routine that suits the rest of the run matters slightly more here.

Both boxes are pre-assembled, both are half-inch plywood with a finished veneer interior, and both hang on the same Blum soft-close hinges as a 36-inch door. On a nine-inch door the soft-close is doing more work than anywhere else in the kitchen, because the arc is short and the swing is fast. If you want to see how the finish behaves at close range before committing a run to it, a door sample is the cheapest test in the project.

Common questions

How much is a 9-inch base cabinet?
GN B09FD displays at $273.00 in the full 24-inch depth, and GN B09FD-12D at $266.50 in the 12-inch depth. Those are the only two base part numbers made at this width.
Can you put a pull-out in a 9-inch base cabinet?
Yes — three 9-inch base pull-out units are listed, at $672.75, $806.00 and $880.75. All three cost more than the cabinet itself, and the listings do not spell out the internal arrangement of each, so confirm which one you are buying.
Is a 9-inch cabinet better than a filler pull-out?
It stores more and costs less: $273.00 against $334.75 for a three-inch filler pull-out or $380.25 for a six-inch one. The filler pull-out wins only where the inches sit beside the cooktop and everything in them is something you reach for while cooking.
Is there a 9-inch drawer base?
No. Drawer banks start at twelve inches. Both 9-inch part numbers are full-height door boxes with no drawer above the door.
What does the 12D suffix mean?
A twelve-inch-deep box at standard base height, rather than the usual 24 inches. At this width it is GN B09FD-12D, $266.50, and it is a planning tool for tight walkways rather than a cheaper option.

Keep reading

The guides behind the numbers on this page.

Get a free 3D design + quote

  • Your layout rendered in 3D, with an itemized quote
  • Back in 3–5 business days
  • Free, and yours to keep either way
Start my design

Still choosing the color? Order a Galaxy Nickel sample and see it in your own light first.

On this page
  1. The only width where the fittings outprice the carcass
  2. Cabinet, filler, or filler with a rack in it
  3. What a narrow door looks like after two years
  4. Common questions
  5. Keep reading

Your Cart

Your cart is empty.

Browse cabinets →
Free · No obligation

See your new kitchen before you spend a dollar

Send rough measurements and a few photos. A designer replies within 1 business day, and you get photorealistic 3D renderings with an itemized quote in 3–5 business days.

Contractors save 20–40% off retail. Have a quick question? Ask Cabinets AI →

Kitchen designed with the free 3D design service from Captivating Cabinets